In this video, we show you how to change the Mounts on a Husqvarna K760.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today we're going to change the mounts on a Husqvarna K760 Disc Cutter. Mounts can easily be broken whilst using the machine, so it's handy to know how to change them. First lie the machine on it's side so you can access the mounts. Then using a torx spanner remove the screw securing the mount to the machine. The mount located on the arm side of the machine can slide off. The mount on the other side has to be pulled from the machine. Position the first mount aligning the holes on the mount and the machine, then place the screw through the foot and fix on with a torx spanner. For the foot on the arm side of the machine, you can slide into place and screw on using a torx spanner. That's how you change the mounts on a Husqvarna K760 Disc Cutter.

Parts

Parts and tools included in the K760 how-to video.

• Anti Vibration Mount - 505 27 95 11
• Screw - 501 98 10 20
• Combination Tool - 506 38 26 01