Description
Overview:
This SDS Plus Hammer Drill Bit, 6 mm diameter with an overall length of 210 mm (approx. 8.27 in / 8-1/4 in), is designed for fast, accurate drilling in concrete, masonry, brick, block, and natural stone. It features a tough, heat-treated steel body with an efficient spiral flute to clear dust and reduce vibration. The tip is tungsten carbide for reliable cutting performance and long service life under hammer action. The SDS Plus shank fits any standard SDS Plus rotary hammer drill, providing positive engagement and minimal slippage. A 150 mm flute length (approx. 5.91 in / 6 in) supports deeper holes while maintaining stability. Supplied as a single bit (Pack Qty: 1), it is a practical choice for fixings, anchors, and repeatable 6 mm holes in site and workshop environments.
Key Features:
- SDS Plus shank for secure fit in SDS Plus rotary hammer drills
- Diameter: 6 mm (approx. 1/4 in) for precise, neat holes
- Overall length: 210 mm (approx. 8.27 in / 8-1/4 in)
- Flute length: 150 mm (approx. 5.91 in / 6 in)
- Tungsten carbide tip for durability and clean cutting
- Hardened steel body with spiral flutes for fast debris removal
- Suitable for concrete, masonry, brick, block, and stone
- Maximum effective drilling depth up to the 150 mm flute length
- Pack quantity: 1
- For SDS Plus chucks only; not compatible with SDS Max or standard three-jaw chucks
Typical Applications:
Ideal for drilling holes for wall plugs and anchors specified for 6 mm drills, such as light to medium-duty fixings, brackets, clips, conduit saddles, and pipe clamps. Suitable for setting frame fixings, screw anchors, cable routing, and general installation work by electricians, plumbers, HVAC engineers, and builders. Performs well on construction sites, refurbishments, and maintenance tasks where consistent hole accuracy in concrete and masonry is required.
Also known as:
SDS+ masonry drill bit; concrete drill bit; rotary hammer bit; 6 x 210 SDS Plus; 6 mm SDS Plus masonry bit; stone drill; percussion hammer bit; SDS shank drill bit for masonry.
Product Specifications
| L&S Part No. | 999 675 |
|---|---|
| Unit of Sale | 1 |
Reviews
Ask a Question
Compatibility
Customers also bought
-
![]()
Key Steel (Imperial) Length: 12" Assorted Pack of 20£83.17 £69.31 -
![]()
Flat Bar, Sizes: 20 x 3-6mm - Assorted Pack of 10£83.68 £69.73
Related Products
-
![]()
Key Steel (Imperial) Length: 12" Assorted Pack of 20£83.17 £69.31 -
![]()
Flat Bar, Sizes: 20 x 3-6mm - Assorted Pack of 10£83.68 £69.73
