Description
Overview:
The Braided Leak Off Pipe is a flexible fuel hose for return and low‐pressure supply duties on engines and machinery. It has a black rubber inner with a durable cotton overbraid for added abrasion resistance and easy handling. Designed for diesel, petrol, and oil circuits, it's suitable for vehicles, plant, agricultural and garden equipment such as mowers, generators and compact machinery. With an inward diameter of 8 mm and a 5 m length, it routes neatly in tight spaces while maintaining flow. Built to DIN SPEC 73379 Type B (1983), it provides dependable service in maintenance and repair work. Working pressure is 150 psi (10 bar). Supplied as MPN 200 441 for straightforward identification and stocking.
Key Features:
- 8 mm inward diameter for use with standard 8 mm hose tails and barbed fittings
- 5 m length for multiple runs or spares on the shelf
- Cotton overbraided outer for strength, kink resistance and protection against scuffs
- Suitable for diesel, petrol and oil in low‐pressure applications
- Meets DIN SPEC 73379 Type B (1983) for consistent quality
- Rated to 150 psi (10 bar) working pressure for typical return and feeder lines
- Good flexibility for tight routing on compact engines and equipment
- Cut‐to‐length convenience; fits with common hose clips or clamps
- Black finish for discreet installation and easy visual inspection
- MPN 200 441 to match manuals, service schedules and parts bins
Typical Applications:
Fuel leak‐off/return from diesel injectors to spill rail or tank, low‐pressure supply between tank, primer bulb, filter and carburettor, and oil transfer lines where specified. Common on cars, vans, small plant, agricultural machines, generators, pressure washers and garden equipment where a tough, flexible 8 mm hose is required.
Also known as:
Return hose, spill rail hose, injector leak‐back hose, fuel return line, braided return pipe, engine leak‐off line, flexible fuel return tube.
Product Specifications
| L&S Part No. | 200 441 |
|---|---|
| Unit of Sale | 1 |
| Key Features | - 8 mm inward diameter fits standard hose tails and barbed fittings - 5 m length allows multiple runs or spare storage - Cotton overbraid enhances strength and abrasion resistance - Suitable for diesel, petrol, and oil in low-pressure applications - Rated to 150 psi (10 bar) working pressure |
