Description
Overview:
The NTN 6210 2RSC3 Deep Groove Ball Bearing is a genuine, closed-face bearing for heavy-duty use in construction and garden machinery. Made from high-grade bearing steel with rubber contact seals on both sides, it is built to keep out dust and debris while holding lubrication in. The 6210 series deep groove geometry supports mainly radial loads with the ability to handle axial loads in both directions, giving smooth, low-friction running. With a 50mm inner diameter, 90mm outer diameter, and 20mm width, this standard metric size suits common housings and shafts found in equipment such as mower decks, compactors, pumps, generators, and electric motors. The C3 internal clearance is suitable for applications that run warm or at higher speeds. Genuine Part status confirms consistent quality and fit.
Key Features:
- Genuine NTN part for consistent quality and dependable service life
- Closed face (2RS) rubber seals on both sides for strong protection against dust and moisture
- 50mm ID x 90mm OD x 20mm width for straightforward replacement in standard 6210 housings
- C3 internal clearance to accommodate thermal expansion and higher-speed operation
- Deep groove design handles radial loads with axial load capability in both directions
- Precision-ground races and quality steel balls for smooth running and reduced noise
- Pre-lubricated and sealed to minimise maintenance and downtime
- Suitable for a wide range of construction and garden equipment, from mower spindles to electric motors
- Easy to fit; standard metric sizing helps reduce installation time
Typical Applications:
Commonly used in mower deck spindles, idlers, compactors, cement mixers, pumps, generators, alternators, conveyor rollers, fans, and general-duty electric motors. Ideal for bearings exposed to dust, soil, grass, and workshop contaminants where sealed, low-maintenance performance is needed.
Also known as:
6210 series sealed deep groove ball bearing, 50x90x20 sealed bearing, 6210 2RS C3 bearing, rubber-sealed ball race, closed-face deep groove bearing.
Alternate Part Numbers:
62102RSC3, 6210 2RSC3
Product Specifications
| L&S Part No. | 62102RSC3 |
|---|---|
| Part Type | Genuine Part |
| Manufacturer | NTN |
| OEM No. | NTN62102RSC3 |
| Unit of Sale | 1 |
| Size | ID: 50mm x OD: 90mm x Width: 20mm |
| Key Features | - 50mm ID x 90mm OD x 20mm width - Closed-face rubber seals protect against dust and moisture - C3 internal clearance for high-speed, warm applications - Deep groove design supports radial and axial loads - Suitable for construction and garden machinery applications |
Reviews
Ask a Question
Compatibility
Customers also bought
-
![]()
Assorted Metric Nyloc Nuts Sizes: M5-M16£15.56 £12.97
