In this video, we show you how to change the Oil Filter on a Hatz 1D42S Engine.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today we are going to check the Oil Filter on a Hatz 1D42S Engine Firstly, remove the Cap by using a Hex Socket Spanner. You can now remove the Oil Filter. Check for any damage, wear or tear, then if necessary replace the oil filter. Place the Oil Filer back into position, this can only be only placed one way with the rubber seal end. You can also check the gasket for damage and renew if necessary. Coat the screw cap thread and gasket with lubricant. Place the cap back and secure with the Hex Socket Spanner, when securing do not overly tighten. That's how you check the Oil Filter on a Hatz 1D42S Engine.

Parts

Parts and tools included in the 1D42S Engine how-to video.

• Genuine Oil Filter - 0148001
• Genuine Rectangular Ring - 50329200
• Socket Set - B/S01535

Popular Products for the 1D42S

##PRODUCT BLOCK HERE##