Description
Overview:
The Timco Hex Slash Metric Timberscrew is a steel fastener for fixing thin sheet metal to timber framing and boards on building, landscaping, and maintenance jobs. Its hex head gives a positive drive with a nut setter or spanner, while the factory-fitted 16 mm washer helps spread load and improve clamping on thin sheet. A Silver Ruspert coating provides strong corrosion resistance for indoor and outdoor use. Size 6.3 x 32 mm (approx. 1/4 x 1 1/4 inches) makes it a practical choice for cladding, roofing trims, ducting, and general fabrication in wood-backed assemblies. Designed to fasten sheet up to 0.9 mm thick (approx. 0.035 inches) to timber, this pack of 100 offers consistent, reliable performance for both trades and DIY work.
Key Features:
- Hex head for positive drive and controlled torque during installation
- Size: 6.3 x 32 mm (approx. 1/4 x 1 1/4 inches) for common cladding and trim jobs
- 16 mm washer (approx. 5/8 inch) spreads load and improves sealing with thin sheet
- Silver Ruspert coating for enhanced corrosion resistance in exterior environments
- Suitable for attaching sheet metal up to 0.9 mm (approx. 0.035 inches) to timber
- Sharp point and thread profile designed for quick start and firm hold in wood
- Reliable steel construction for strength and long service life
- Clean, low-profile finish under the washer for neat results
- Compatible with standard hex nut setters and spanners; straightforward to fit
- Supplied in a pack of 100 for efficient site or workshop use
Typical Applications:
Fixing metal cladding, flashings, and trims to timber battens; assembling sheds, gates, and agricultural buildings; securing vents, ducting, and thin sheet panels to wooden frames; attaching edge protection, angle, or brackets to timber; maintenance and repair work on fencing, outbuildings, and garden structures where metal-to-wood joints are required.
Also known as:
Metal-to-wood screws, hex washer head screws, cladding screws, roofing fixings, hex head timber screws, sheet-to-timber fasteners, exterior wood screws with washer, steel cladding fixings, hex drive screws for timber, bonded washer screws.
Product Specifications
| L&S Part No. | 903 2082 |
|---|---|
| Manufacturer | Timco |
| OEM No. | DS32W16B |
| Unit of Sale | Pack of 100 |
| Size | 6.3 x 32mm |
| Key Features | - Hex head for positive drive with nut setter or spanner - Size 6.3 x 32 mm for cladding and trim jobs - 16 mm washer spreads load and improves sealing - Silver Ruspert coating for corrosion resistance - Suitable for sheet metal up to 0.9 mm thick |
Reviews
Ask a Question
Compatibility
Customers also bought
-
![]()
Key Steel (Imperial) Length: 12" Assorted Pack of 20£83.17 £69.31 -
![]()
Flat Bar, Sizes: 20 x 3-6mm - Assorted Pack of 10£83.68 £69.73
Related Products
-
![]()
Key Steel (Imperial) Length: 12" Assorted Pack of 20£83.17 £69.31 -
![]()
Flat Bar, Sizes: 20 x 3-6mm - Assorted Pack of 10£83.68 £69.73
